Wood Heating Systems
SOLARvent IQ are a specialist manufacturer of wood pellet boilers and burners from Germany.
The boiler burns wood pellets to generate heating and hot water for your home. The boiler is fully automatic and runs at an efficiency of up to 96% even in part load. The combustion of the wood pellets are monitored by an integral oxygen sensor which adjusts the amount of air and fuel entering the burner for a complete and efficient combustion.
There is an integral wood pellet storage hopper attached to the boiler which holds around 162 kg of fuel . This amount of fuel would automatically heat up around 210 regular size baths or heat an average size 3 bed semi detached house during winter for around 16 days. The wood pellet fuel can be bought in small 15kg bags to be manually loaded in to the hopper or bulk blown into a wood pellet silo by a delivery truck for longer periods of operation.
The integral hopper has a sensor inside which senses when the fuel level is low and triggers a relay which automatically brings more pellets into the store from the silo. The main feature of the SOLARvent IQ boiler is the state of the art remote access touch screen panel. The boiler can be accessed remotely via any Ipad, Iphone or smart phone. The user has full control of the boiler wherever they are enabling them to change any parameters on the boiler and to check that it is working correctly.
This technology gives the owner of the boiler complete peace of mind as the SOLARvent IQ and AJ Tinney engineers can carry out regular service checks to the boiler. Automatic alarms can be set up to email the engineer alerting them of any issues with the boiler. Each component within the boiler can be monitored giving a realtime analysis of any issues that may arise.
| Pellet boiler model: | IQ 120 | IQ 150 | IQ 200 | IQ 270 |
| Heating capacity in kW: | 4 – 12 | 4 – 14,9 | 4 – 20 | 4 – 25 |
| Exhaust temperature Qnominial in °C: | 100,5 | 124,3 | 141,5 | 157,5 |
| Exhaust temperature Qmin in °C: |
73,5 |
73,5 |
73,5 |
73,5 |
| Exhaust mass flow Qnominial in g/s: |
8,5 |
12,2 |
14,2 |
16,4 |
| Exhaust mass flow Qmin in g/s: |
4,6 |
4,6 |
4,6 |
4,6 |
| Required flue drag at rated power in Pa: |
10 |
|||
| Required flue drag at ignition/part load in Pa: |
min. 4 – max. 10 |
|||
| CO2 at nominal load (Vol%): |
10,2 |
11,3 |
11,6 |
12,0 |
| CO2 at part load (Vol %): |
7,4 |
7,4 |
7,4 |
7,4 |
| Connection dimension smoke tube in mm: |
130 |
|||
| Flue and return in inches: | male screw thread 1“ | |||
| Safety level, draining (inches): | female screw thread 3/4″ | |||
| Boiler water-content in liter: |
55 |
|||
| Water resistance at 20 K in mbar: |
5 |
6 |
8 |
10 |
| Water resistance at 10 K in mbar: |
20 |
24 |
32 |
40 |
| Boiler classification: |
3 |
|||
| Area of boiler nominal temperature in °C |
60 – 80 |
|||
| Minimum return temperature in °C |
55 |
|||
| Fuels according to DIN or similar quality (diametre 6mm): | DINplus, ash melting temperature > 1.300°C | |||
| Electric current consumtion at standby, approx in W: |
16 |
|||
| Electric current consumtion at ignition, approx in W: |
~ 230 |
|||
| Electric current consumtion at average power, approx in W: |
— |
106 |
— |
— |
| 230 Volt grid connection: |
16 A, 50 Hz |
|||
| Boiler main switch-off to be installed additionally: |
Yes |
|||
| CE-Conformity declaration (DIN EN 292-2 Machines guidelines) |
Yes |
|||
| Weight: Total / boiler | ~ 450 kg / ~ 300 kg | |||
